COMPARATIVE ANALYSIS ОF GEOMETRIC DEVIATIONS IN CONTACT MEASURING INSTRUMENTS FOR CONTROL AND LASER CONTACTLESS SCANNING
DOI:
https://doi.org/10.17770/etr2023vol3.7182Keywords:
Geometric accuracy, laser scanning, tactile sensor . 3D printing ErrorAbstract
The factors affecting the dimensional accuracy of 3D scanning using a measuring arm with an integrated scanner and a custom open source 3D printer using FDM technology are researched in this paper, with the purpose of isolating and reducing the sources of errors affecting the results. A consumer 3D printer is analyzed in terms of achieving accurate physical dimensions, consistent shapes, and predictable surface coverage.
References
W.-K. Chen, Linear Networks and Systems. Belmont, CA: Wadsworth, 1993, pp. 123-135.
Z. Sheb, Tang., O. Kanaan, and Y. Cho, As-Built Error Modeling for Effective 3D Laser Scanning on Construction Sites, Proceedings of the 2013 ASCE International Workshop on Computing in Civil Engineering, June 23-25, Univ. of Southern California, LA, California. pp. 533-540.
D. Dichev, I. Zhelezarov, N. Madzharov. System for Measuring the Attitude of Moving Objects, using a Kalman Filter and MEMS Sensors. Comptes rendus de l’Academie bulgare des Sciences, Volume 72, Issue 11, pp. 1527-1536, 2019, DOI: 10.7546/CRABS.2019.11.10
D. Hernandez, Factors Affecting Dimensional Precision of Consumer 3D Printing. International Journal of Aviation, Aeronautics, and Aerospace, 2(4), 2015. https://doi.org/10.15394/ijaaa.2015.1085
D. Dichev, F. Kogia, H. Nikolova, D. Diakov. A Mathematical Model of the Error of Measuring Instruments for Investigating the Dynamic Characteristics. Journal of Engineering Science and Technology Review. Volume 11, Issue 6, 2018, pp. 14-19, DOI: 10.25103/jestr.116.03
M. Jadayel and F. Khameneifar, Improving Geometric Accuracy of 3D Printed Parts Using 3D Metrology Feedback and Mesh Morphing, J. Manuf. Mater. Process. 2020, 4, 112; doi:10.3390/jmmp4040112
E. Sachs, M. Cima, P. Williams, D. Brancazio, J. Cornie, Three Dimensional Printing: Rapid Tooling and Prototypes Directly from a CAD Model. J. Eng. Ind. 1992, 114, 481–488.
Ts. Zlateva-Petltova, The necessity of organizational learning and its relation to knowledge management, IV International conference “Economics and management – based on the new technologies”, EMoNT 2014, 12-15 June 2014. Vrnjachka Banja. Serbia, pp. 376-384, ISBN 978-86-6075-045-9
Z. Lianghua, Z. Xinfeng, Error Analysis and Experimental Research on 3D Printing, IOP Conf. Series: Materials Science and Engineering 592 012150, 2019,
doi:10.1088/1757-899X/592/1/012150.
Ts. ZIateva-Petkova, Planning and forecasting future demand for employees, VI International Conference “Economics and management – based on new technologies”, EMoNT 2016, 16-19 June 2016, Vrnjacka Banja, Serbia, pp. 401-406, ISBN: 978-86-6075-059-6
H. Wang, J. Wang, Q. Zhou, Q. Xiong, Z. Wei 2017 Comprehensive Error Compensation Method of Numerical Control Machine Based on BP Neural Network. Journal of Xi'an Jiaotong University 6:138~145
T. Pencheva, D. Pulov, B. Gyoch, M. Nenkov Design of CCD Optical System for Thermal IR Spectral Region. In pr. 29-th International Spring Seminar fn Electronics Technology, St. Marienthal, Germany, Verlag Dr. Markus A. Detert, 2006, pp. 413-418, ISBN 3-934142-23-0.
