CUTTING MODES IN MULTI-PASS TURNING ON CNC LATHES

Authors

  • Silviya Salapateva Faculty of Mechanical Engineering, Technical University of Sofia, Plovdiv Branch, Center of competence ”Smart mechatronic, eco-and energy-saving systems and technologies”
  • Angel Lengerov Faculty of Mechanical Engineering, Technical University of Sofia, Plovdiv Branch, Center of competence ”Smart mechatronic, eco-and energy-saving systems and technologies”

DOI:

https://doi.org/10.17770/etr2025vol4.8424

Keywords:

machine building, CNC lathes, cutting modes

Abstract

Rolled workpieces are widely used when turning on CNC lathes. The difference between the dimensions and shape of the workpiece and the machine part in these cases is significant and it is necessary to remove the excess of material with the least possible loss of time. This is achieved by means of sequential execution of the work steps (passes) with the corresponding program cycles. Determining the number of passes and the corresponding cutting mode is an optimization problem, which is the subject of the present work.

 

References

T. Kuzmanov, V. Georgiev, H. Metev, Technological processes for CNC machine tools, Publisher: Eks-Pres”, Gabrovo, 2007.

K. Kumar, Chikes Rabjan, J. Davim, CNC Programming for Machining (Materials Forming, Machining and Tribology), Publisher: Springer Nature Switzerland, 2020.

www.sandvikcoromant.org

N. Yemelyanov, I. Yemelyanova, V. Zubenko, “Improving Machining Accuracy Of Cnc Machines With Innovative Design Methods”, IOP Conference Series Materials Science and Engineering, DOI:10.1088/1757-899X/327/4/042028, 2018.

V. Georgiev, S. Salapateva, “Increasing productivity in CNC turning”, Notices of the Technical University in Plovdiv, vol.10, pp.101-107, 2023.

D. Stephenson, J. Agapiou, Metal Cutting Theory and Practice, Publisher: CRC Press, 2019.

А. Averchenkov, B. Bazrov, et al., Handbook of a mechanical engineer in 2 volumes, Publishing House: Mashinostroenie, Moscow, 2023.

Downloads

Published

08.06.2025

Issue

Vol. 4 (2025): Environment. Technology. Resources. Proceedings of the 16th International Scientific and Practical Conference. Volume 4

Section

Engineering Sciences and Production Technologies

License

Copyright (c) 2025 Silviya Salapateva, Angel Lengerov

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

CUTTING MODES IN MULTI-PASS TURNING ON CNC LATHES. (2025). ENVIRONMENT. TECHNOLOGY. RESOURCES. Proceedings of the International Scientific and Practical Conference, 4, 369-373. https://doi.org/10.17770/etr2025vol4.8424