IMPROVEMENT OF DIMENSIONAL ACCURACY ANALYSIS FOR ASSEMBLY OF ENGINEERING PARTS
DOI:
https://doi.org/10.17770/etr2025vol4.8422Keywords:
fixture, assembly, accuracy, accuracy analysisAbstract
This publication proposes approaches to improve accuracy of assembly of mechanical engineering parts based on the use and application of dimensional analysis. The conclusions drawn show that by determining appropriate tolerances for elements of fixtures, the specified accuracy of the processed parts is ensured.
References
A.-K. Onken, F. Meiners and K. Tracht, “Spare parts for selectively assembled linked parts in micro production”, Procedia Manufacturing, vol. 19, pp. 82–86, 2018. [Online]. Available: https://doi.org/10.1016/j.promfg.2018.01.012. (Accessed: January 4, 2025).
K. Hirano, K. Mori and A. Matsubara, “Experimental Characterization of Contact Stiffness for Fixture Design”, International Journal of Automation Technology, vol. 19, pp. 15–23, 2025. [Online]. Available: https://doi.org/10.20965/ijat.2025.p0015. (Accessed: January 4, 2025).
V. Lebedev, G. Prokopec, Y. Korol'kov and A. Shishkina, “Technological assurance of surface quality and operational properties of machine parts”, 2024. [Online]. Available: https://doi.org/10.12737/1900534. (Accessed: January 4, 2025).
F. Zhao, Z. Liu, D. Wang, Q. Huang and S. Chen, “Coupled Study on the Uniformity and Dimensional Accuracy of 316L Microchannel Roll Forming”, 2024. [Online]. Available: https://doi.org/10.21203/rs.3.rs-5292086/v1. (Accessed: January 4, 2025).
C. U. Jung and V. Nallagatla, “Significant error in significant figures?”, Journal of the Korean Physical Society, vol. 78, 2021. [Online]. Available: https://doi.org/10.1007/s40042-020-00027-5. (Accessed: January 10, 2025).
L. Yin, F. Yang, P. Zhu and Q. Qin, “Research on module partition for remanufacturing parts to be assembled”, The South African Journal of Industrial Engineering, vol. 33, pp. 114–125, 2022. [Online]. Available: https://doi.org/10.7166/33-1-2646. (Accessed: January 4, 2025).
Z. Chen, L. Shen, C. Zhang, C. Li, J. Shou and J. Zhang, “Design of Special Fixture for Welding Assembly of Steel Joints”, 2022. [Online]. Available: https://doi.org/10.1007/978-981-19-1309-9_41. (Accessed: January 4, 2025).
G.Shterev, P.Mitev, ‘‘Automated system for control and management of a machine forautomatic assembly of curtain brackets and hooks’’, Metrology and Metrology Assurance, pp.345-347, 2017
I. Lind, M. Luginbill, T. Nalli and J. Shaktman, “Automated Fixture for Crankshaft Inspection”, 2011.
U. Werner, “Shaft vibrations in induction machines caused by 2x excitation due to elliptical form deviations of the shaft journals”, Proc. 19th Int. Congr. Sound Vib. (ICSV), vol. 1, pp. 65–72, 2012.
K. Qian and Y. Chen, “A gear tooth side clearance adjustment device and measurement method”, Journal of Physics: Conference Series, vol. 2913, p. 012011, 2024. [Online]. Available: https://doi.org/10.1088/1742-6596/2913/1/012011. (Accessed: January 4, 2025).
I. Voyachek, E. Slashchev and D. Malikova, “Feasibility Study of Applying Group Interchangeability Method for Assembly Components of Machines”, 2020. [Online]. Available: https://doi.org/10.1007/978-3-030-22063-1_30. (Accessed: January 4, 2025).
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Angel Lengerov, Silvia Salapateva, Konstantin Chukalov
This work is licensed under a Creative Commons Attribution 4.0 International License.