DEVELOPING LATHES POSTPROCESSOR GENERATING CYCLES OF PROCESSING GROOVES

Authors

  • Tsvetan Kaldashev Technical university of Sofia

DOI:

https://doi.org/10.17770/etr2019vol3.4186

Keywords:

CNC, postprocessor, canned cycle

Abstract

This article explores the possibility of developing a post-processor generating circles for radial and facsimile grooves in PTC Creo environments using a generalized postprocessor G-POST and a specialized language FIL (Factory Interface Language). The proposed development approach can also be applied to post-processor generating cycles for rough and fine turning (G71, G72 and G70).

References

Doosan Puma series, Programming manual, MXTTPGE68;

FIL Help V6.6;

HJ. Patthi Bin Hussain, Zhu Yuesheng, Murthy Rallapalli and J.Mahmud, Development of Post Processor for Dual-Spindle Turning Center, Applied Mechanics and Materials, 2014, Vols. 541-542, pp 804-807, ISSN 1662-7482;

Čuboňová, N., Postprocessing of cl data in CAD/CAM system edgecam using the constructor of postprocessors, Manufacturing Technology, Vol. 13, Iss. 2, 2013, pp 158-164, ISSN 1213-2489;

Hadjiiski, P. I., Kaldashev, T. P., Creation of lether postprocessor generate repeated cycle in an environment of Pro/Engineer, International scientific conference-FIT 2012, pp. 245-249, 2012, Bulgaria, ISBN 978-954-438-994-9.

Downloads

Published

20.06.2019

Issue

Vol. 3 (2019): Environment. Technology. Resources. Proceedings of the 12th International Scientific and Practical Conference. Volume 3

Section

Engineering Sciences and Production Technologies

How to Cite

DEVELOPING LATHES POSTPROCESSOR GENERATING CYCLES OF PROCESSING GROOVES. (2019). ENVIRONMENT. TECHNOLOGY. RESOURCES. Proceedings of the International Scientific and Practical Conference, 3, 74-76. https://doi.org/10.17770/etr2019vol3.4186