LASER SURFACE TRANSFORMATION HARDENING WITH HIGH-POWER DIODE LASERS
DOI:
https://doi.org/10.17770/etr2025vol4.8392Keywords:
Austenite, High-Power Diode Laser, Laser surface hardening, Martensite, Phase TransformationAbstract
Laser Surface Hardening (LSH) is an advanced technique applicable to a wide range of metals and alloys in modern industrial manufacturing, including the automotive sector. Among the various laser types used for hardening, CO₂, solid-state Nd: YAG, and fibre lasers have traditionally been the most common. However, with the development of high-power diode lasers (HPDLs), these have increasingly gained prominence in this field. In the LSH process, high-intensity laser radiation is focused on a localized area, rapidly heating and hardening the material's surface. The steep temperature gradients resulting from rapid heating and cooling induce structural transformations within the treated area. Additionally, the phase transformation from austenite to martensite occurs without the need for external cooling, simplifying the process. This review paper outlines the fundamental principles of laser hardening and its advantages over conventional hardening techniques. Key process parameters and influencing factors are discussed, along with a comparative analysis of LSH against other hardening methods. Furthermore, an overview of experimental research in this area is provided, with a particular focus on HPDL-based hardening. Various methods for analysing and evaluating laser-treated surfaces are also examined.References
T.H. Maiman, Stimulated optical radiation in ruby, (1960).
Laser Materials Processing, 1st ed.; Bass, M. (Ed.) Elsevier Science: Amsterdam, The Netherlands, 1983; Volume 3, ISBN 9780444601322.
Guarino, S.; Barletta, M.; Afilal, A. High Power Diode Laser (HPDL) surface hardening of low carbon steel: Fatigue life improvement analysis. J. Manuf. Process. 2017, 28, 266–271.
Nemova, G. Brief Review of Recent Developments in Fiber Lasers. Appl. Sci. 2024, 14, 2323.
L. Li, The advances and characteristics of high-power diode laser materials processing, Opt. Lasers Eng. 34 (2000) 231–253.
Bons, S.; Seifert, M.; Brenner, B.; Beyer, E. Laser beam hardening—an energy-efficient heat treatment? In Proceedings of the 28th International Congress on Laser Applications and Electro-Optics, Orlando, FL, USA, 2–5 November 2009; Laser Inst. of America: Orlando, FL, USA, 2009; pp. 219–224.
Casalino, G.; Giorleo, L.; Capello, E.; Segui, V.J. Laser irradiation after machining to recover deformation induced by surface laser hardening. In Proceedings of the Third International Conference of the Society for Manufacturing Engineering: MESIC-09, Alcoy, Spain, 17–19 June 2009.
Kennedy, E.; Byrne, G.; Collins, D.N. A review of the use of high-power diode lasers in surface hardening. J. Mater. Proc. Tech. 2004, 155–156, 1855–1860.
Tan, C.Y.; Wen, C.; Ang, H.Q. Influence of laser parameters on microstructures and surface properties in laser surface modification of biomedical magnesium alloys. J. Magnes. Alloy 2024, 12, 72–97.
Tan, S.; Weng, F.; Sui, S.; Chew, Y.; Bi, G. Progress and prospects in laser additive manufacturing of key materials for aircraft engines. Int. J. Mach. Tools Prod. 2021, 170, 103804.
Homberg, D.; Weiss, W. PID control of laser surface hardening of steel. IEEE Trans. Control System Tech. 2006, 14, 896–904.
Lasota, I.; Protsenko, V.; Matyushkin, A.; Kuznetsov, M.; Gook, S. Laser surface hardening of engine camshaft cams. Mater. Today Proc. 2020, 30, 478–482.
Wang, X.; Lu, Q.; Zhang, P.; Yang, H.; Shi, H.; Sun, T.; Zhou, K.; Chen, K. Review of the simulation of selective laser melting of AlSi10Mg. Opt. Laser Technologies. 2024, 174, 110500.
Li, L. The progress and characteristics of high-power diode laser materials processing. Laser Mater. Proc. 2000, 34, 231–253.
Kennedy, E.; Byrne, G.; Collins, DN A review of the use of high-power diode lasers in surface hardening. J. Mater. Proc. Tech. 2004, 155–156, 1855–1860.
Li, W.-B.; Easterling, K.E. Residual stresses in laser transformation hardened steel. Surf. Eng. 1986, 2, 43–48.
Patwa, R.; Shin, Y.C. Predictive modeling of laser hardening of AISI5150H steels. Int. J. Mach. Tools Manuf. 2007,47, 307–320.
Moradi, M.; Fallah, M.M.; Jamshidi Nasab, S. Experimental Study of Surface Hardening of AISI 420 Martensitic Stainless Steel
Using High Power Diode Laser. Trans. Indian Inst. Met. 2018, 71, 2043–2050.
Maharjan, N.; Zhou, W.; Zhou, Y.; Guan, Y.; Wu, N. Comparative study of laser surface hardening of 50CrMo4 steel using continuous-wave laser and pulsed lasers with ms, ns, ps and fs pulse duration. Surf. Coat. Technol. 2019, 366, 311–320.
Maharjan, N.; Zhou,W.;Wu, N. Direct laser hardening of AISI 1020 steel under controlled gas atmosphere. Surf. Coat. Technol., 2020, 385, 125399.
Frerichs, F.; Lu, Y.; Lübben, T.; Radel, T. Process signature for laser hardening. Metals 2021, 11, 465.
Steen, W. M. (2003). Laser Material Processing, 3rd Edition. Springer-Verlag, London. 408p.
Davis, J. R. (2002). Surface Hardening of Steels: Understanding the Basics, ASM International, Materials Park (OH). 364 p.
Annealing Thermal Cycles, What is Thermal Annealing - Definition - Material Properties 3.03.2025
Brooks, C. R. (1992). Principles of the Austenitization of Steels. Springer, London. 232p.
Thelning, K-E. (1984). Steel and Its Heat Treatment, 2nd Edition.Butterworth-Heinemann, London. 704p.
J.F. Ready, Ready, J. F. (1997). Industrial Application of Lasers, 2nd Edition. Academic Press, London. 599p.
B. Ehlers, H.J. Herfurth, S. Heinemann, Hardening and welding with high power diode lasers, Proc. SPIE 3945 (2000) 63–70.
P. Loosen, G. Treusch, C.R. Haas, U. Gardenier, M. Weck, V. Sinnhoff, St. Kasperowski, R. vor dem Esche, High-power diodelasers and their direct industrial applications, Proc. SPIE 2382 (1995) 79–88.
Laser Institute of America, Handbook of Laser Materials Processing, Magnolia Publishing Inc., 2001.
L. Li, The advances and characteristics of high-power diode laser materials processing, Opt. Lasers Eng. 34 (2000) 231–253.
H. Hugel, New solid-state laser and their application potentials, Opt. Lasers Eng. 34 (2000) 213–229.
M. Haag, T. Rudlaff, Assessment of different high power diode lasers for materials processing, Proc. SPIE 3097 (1997) 583–591.
Pantsar H. (2005). Models for Diode Laser Transformation Hardening of Steels: [D]. Lappeenranta: Lappeenranta University of Technology.
Grum, J. (2007). Comparison of different techniques of laser surface hardening.Journal of Achievements in Materials and Manufacturing Engineering, 24 (1), 17-25.
Ion, J. C. (2002). Laser transformation hardening. Surf. Eng., 18 (1), 14-31.
Dossett, J. L. and Boyer, H. E. (2006). Practical Heat Treating, 2nd Edition. ASM International, Metals Park (OH). 296p.
Grum, J. Steel Heat Treatment: Equipment and Process Design (edited by Totten, G. E.), 2nd Edition. Ch. 6, 443-447. (2006). CRC Press, New York.
Gong H, Klinger J, Damazyn K, Li X, Huang S. A novel procedure for statistical inference and verification of gene regulatory subnetwork. BMC Bioinformatics. 2015;16 Suppl 7(Suppl 7):S7. doi: 10.1186/1471-2105-16-S7-S7.
Na, S. J. and Yang, Y. S. (1987). Prediction of laser surface hardening zone by using the finite difference method. Proc. of the Int. Conf. on ‘Laser Advanced Materials Processing-Science and Applications (LAMP ’87)’, (May 21-23), Osaka, Japan, Paper 5A02.
Fritz Klocke, Martin Schulz, Stefan Gräfe, Optimization of the Laser Hardening Process by Adapting the Intensity Distribution to Generate a Top-hat Temperature Distribution Using Freeform Optics, Coatings 2017, 7(6), 77; https://doi.org/10.3390/coatings7060077
Baumann, M., Krause, V., Bergweiler, G., Flaischerowitz, M. and Banik, J. (2012), Local heat treatment of high strength steels with zoom-optics and 10kW-diode laser. Proc. of SPIE on ‘High Power Laser Materials Processing: Lasers, Beam Delivery, Diagnostics, and Applications’, (January 21-26), San Francisco, USA, Paper 82390J.
Laskin, A. and Laskin, V. (2012). Applying of refractive beam shapers of circular symmetry to generate non-circular shapes of homogenized laser beams. Proc. Of SPIE on ‘Laser Resonators and Beam Control XIII’, (January 22-25), San Francisco, USA, Paper 79130J.
Bradley, J. R. (1988). A simplified correlation between laser processing parameters and hardened depth in steels. Journal of Physics D: Applied Physics, 21 (5), 834-837.
Pantsar H. (2005). Models for Diode Laser Transformation Hardening of Steels: [D]. Lappeenranta: Lappeenranta University of Technology.
Panwar, A.S.; Singh, A.; Sehgal, S. Materials characterization techniques in engineering applications: a review. Mater. Today Proc. 2020, 28, 1932–1937.
Fritz Klocke, Martin Schulz, Stefan Gräfe, Optimization of the Laser Hardening Process by Adapting the Intensity Distribution to Generate a Top-hat Temperature Distribution Using Freeform Optics, Coatings 2017, 7(6), 77, doi.org/10.3390/coatings7060077
Obergfell, Katja, Schulze, Volker, Löhe, Detlef and Vöhringer, Otmar. "Application of X-Ray Diffraction Analysis on Microstructural Investigations of Laser-Hardened Steel Surfaces" International Journal of Materials Research, vol. 92, no. 3, 2001, pp. 265-269. https://doi.org/10.3139/ijmr-2001-0053
Leonardo Orazi, A. Rota, Barbara ReggianiExperimental investigation on a novel approach for laser surface hardening modelling, International Journal of Mechanical and Materials Engineering, 2021, 16(1):2, DOI: 10.1186/s40712-020-00124-0
Moisés Meza Pariona, Viviane Teleginski, Kelly dos Santos, et al.,AFM study of the effects of laser surface remelting on the morphology of Al–Fe aerospace alloys, Materials Characterization, Volume 74, 2012, Pages 64-76, ISSN 1044-5803, https://doi.org/10.1016/j.matchar.2012.08.01
Omar Fadhil Abdullah,Orass Abdulhadi Hussein, Emad Toma Karash, The Laser Surface Treatment Effective on Structural Properties for Invar Alloy (Fe-Ni) Type Prepared by Powder Technology, Key Engineering Materials 844:97-103, 2020
Tonietto, L., Gonzaga, L., Veronez, M.R. et al. New Method for Evaluating Surface Roughness Parameters Acquired by Laser Scanning. Sci Rep 9, 15038 (2019). https://doi.org/10.1038/s41598-019-51545-7
EL Ghadoui, M., Mouchtachi, A. & Majdoul, R. Intelligent surface roughness measurement using deep learning and computer vision: a promising approach for manufacturing quality control. Int J Adv Manuf Technol 129, 3261–3268 (2023). https://doi.org/10.1007/s00170-023-12457-z
Koç, E., Zeybek, S., Kısasöz, B.Ö. et al. Estimation of surface roughness in selective laser sintering using computational models. Int J Adv Manuf Technol 123, 3033–3045 (2022). https://doi.org/10.1007/s00170-022-10406-w
Noureddine Barka, Sasan Sattarpanah Karganroudi, Rachid Fakir, Patrick Thibeault, Vincent Blériot Feujofack Kemda, Effects of Laser Hardening Process Parameters on Hardness Profile of 4340 Steel Spline—An Experimental Approach, Coatings 2020, 10(4),342; https://doi.org/10.3390/coatings10040342
Barka N, Sattarpanah Karganroudi S, Fakir R, Thibeault P, Feujofack Kemda VB. Effects of Laser Hardening Process Parameters on Hardness Profile of 4340 Steel Spline—An Experimental Approach. Coatings. 2020; 10(4):342. https://doi.org/10.3390/coatings10040342
Erdem, M.; Altuğ, M.; Karabulut, M. Investigation of mechanical, microstructural, and machining properties of AISI 420 martensitic stainless steel welded by laser welding. Int. J. Adv. Manuf. Technol. 2016, 85, 481–492.
Broitman, E., Indentation Hardness Measurements at Macro-, Micro-, and Nanoscale: A Critical Overview. Tribol Lett 65, 23 (2017). https://doi.org/10.1007/s11249-016-0805-5
Maziar Ramezani, Zaidi Mohd Ripin, Tim Pasang, Cho-Pei Jiang, Cho-Pei Jiang, Surface Engineering of Metals: Techniques, Characterizations and Applications, Metals 2023, 13(7), 1299; https://doi.org/10.3390/met13071299
Su, Y.L.; Kao, W.H.; Chang, G.Y. Tribological, Anti-corrosion, and Electrical Conductivity Properties of CrCx Coatings Deposited on Stainless Steel 316L and Used as Metal Bipolar Plates for Fuel Cells. J. Mater. Eng. Perform. 2023, 32, 3739–3754.
Panwar, A.S.; Singh, A.; Sehgal, S. Material characterization techniques in engineering applications: A review. Mater. Today Proc. 2020, 28, 1932–1937.
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Normunds Teirumnieks, Lyubomir Lazov, Emil Yankov, Edmunds Teirumnieks, Prodan Prodanov, Artis Teilans
This work is licensed under a Creative Commons Attribution 4.0 International License.