DETERMING THE COMPENSATING ACTION OF COPPER AFTER SINTERING OF POWDER METALLURGICAL STRUCTURAL STEELS
DOI:
https://doi.org/10.17770/etr2025vol4.8439Keywords:
carbon concentration, density, dimensional changes, iron powder, permeabilityAbstract
This paper studies the dimensional changes during sintering of steel powders structural materials alloying with a 2,5 percents copper compound. Studied were three types of steel powders – NC 100.24; SC100.26 and ASC 100.29. Carbon concentration in the test pieces is between 0,2 and 0,8 percents, and their density between 6,2 and 7,0 grams per cubic centimeter. Presented are graphical relationships of the dimensional changes depending on the carbon concentration in the tested samples and their density.References
D. Petrova, B. Vlahova, A. Lengerov,Tz. Zlateva-Petkova, “Improvement of Constructive-Technological Approaches Reducing Innovative Obsolescence of Industrial Technologies in the Context of Industry 4.0”, presented at the 14th International Scientific and Practical Conference on Environment, Technology, Resources, ETR 2023, Rezekne, Latvia, June, 2023, Volume I, pp. 180–186.
D. Petrova, B. Vlahova, A. Lengerov, Tz. Zlateva-Petkova, “Study of the State of Innovation Development and Obsolescence in the Republic of Bulgaria of Companies from the Mechanical Engineering Sector”, presented at the 14th International Scientific and Practical Conference on Environment, Technology, Resources, ETR 2023, Rezekne, Latvia, June, 2023, Volume I , pp. 187–194.
D. Petrova, N. Nikolova, A. Lengerov, “Modeling business process reengineering in the digital era of industry 4.0”, presented at the 11th International Scientific Conference “TechSys 2022” – Engineering, Technologies and Systems, 2022, pp. 070013-1 - 070013-7.
D. Petrova, “Innovative Obsolescence in Mechanical Engineering and Singleness of Indicators”, presented at the 15th International Scientific and Practical Conference on Environment, Technology, Resources, ETR 2024, Rezekne, June 2024, Vol. 3, pp 221 – 224.
G. Karlovski et al., “Selection of Instrumentation Based on Statistical Analysis”, presented at the 32nd International Scientific Symposium “Metrology and Metrology Assurance”, MMA 2022, Sozopol, 7-11 September 2022.
T. Kuzmanov, Hr. Metev, S. Parashkevov, Electrophysical and electrochemical technologies in mechanical engineering, EKS-PRESS, Gabrovo, 2005.
S. Tsenkulovski, I. Mitev “Influence of the Parameters of the Lasser marking process of the depth of penetration in layer-reinforced composites”, presented at the 15th ISPC “Environment Technology Resources”, V.Turnovo, Bulgaria, 27 and 28 06.2024, Vol. 3, pp 319-324.
I. Mitev, S. Tsenkulovski, “Local Processing of Non-Metal Materials with Concentrated Energy Flow”, presented at the 14th International Scientific and Practical Conference on Environment, Technology, Resources, ETR 2023, Rezekne, Latvia, June, 2023, Volume 3, pp.183÷186.
L. Sobotova., “Laser marking as environment technology.”, Journal Open Engineering. Available: https://doi.org/10.1515/eng-2017-0030, [Accessed January 15, 2025]
I. Mitev, Unconventional electrotechnological processes, EKS-PRESS, Gabrovo, 2020.
I. Mitev, Copper in two-component powder metallurgical systems, EX-PRESS, Gabrovo, 2019.
I. Miteva, I.Vinev, I.Mitev, “Features of Alloying Matrix of Water-dispersed Iron Powders”, presented at the 13th International Scientific and Practical Conference on Environment, Technology, Resources, ETR 2021, Rezekne, Latvia, Volume 3, 2021, рр.226÷231.
I. Miteva, et all., “Influence of the pressing force on the strength properties of sintered materials based on water-dispersed iron powders alloyed with cooper.”, IJSTII “Machines technologies Materials”, year XV, Issue 1/2021, pp. 34÷37
I. Miteva, et all., “Influence of the pressing force on the mechanical characteristics of an iron matrix of water dispersed powder alloyed with nickel”, Journal of the Technical University of Gabrovo, Volume 63, 2021, pp.47÷50.
I. Mitev, “Optimizing the quantity of liquid phase at the sintering of powder construction materials from system Fe-Cu-Sn”, presented at AIP Conference, 2024, Vol. 2980, pp.060017-1÷060017-7.
I. Mitev, “Determining the diffusion coefficient in simultaneous saturation with boron and carbon austenite alloyed with cooper in powder metallurgy structural materials”, presented at AIP, vol. 2980, 2024, p.060016-1÷060016-7.
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Petko Naydenov
This work is licensed under a Creative Commons Attribution 4.0 International License.