RESEARCH OF THE SURFACE ROUGHNESS DURING HARD TURNING OF 42CRMOS4 STEEL WITH A QUICK-CHANGE TOOL HOLDER
DOI:
https://doi.org/10.17770/etr2025vol4.8437Keywords:
hardened alloy steels, regression analysis, Swiss type lathesAbstract
This paper presents an analysis of the surface roughness during turning of hardened 42CrMoS4 steel using a quick-change tool holder with innovative design. The experiments used a Swiss-type CNC lathe - GOODWAY SW-20. The process was performed at cutting speed of 130 to 170 m/min, feed of 0.12 to 0.18 mm/tur and cutting depth of 1.5mm. Based on the results obtained, a mathematical model was developed, the graphic interpretation of which is presented in two-dimensional and three-dimensional coordinate systems. The mathematical model was used in the dispersion analysis to determine the influence of speed and feed during turning on the roughness of the machined surface. Graphical relationships are presented for the influence of the controlling factors on roughness.References
D. Petrova, B. Vlahova, A. Lengerov, Tz. Zlateva-Petkova, “Study of the State of Innovation Development and Obsolescence in the Republic of Bulgaria of Companies from the Mechanical Engineering Sector”, presented at the 14th International Scientific and Practical Conference on Environment, Technology, Resources, ETR 2023, Rezekne, Latvia, June, 2023, Volume I , pp. 187–194.
G. Karlovski, “A System for Quick-change Tool Mounting”, Automation of discrete production, Vol. 5, Sofia, 2023, pp.82÷85.
G. Karlovski, “Application for quick-change holders as a way to increase efficiency in the production of workpieces with CNC machines”, Automation of discrete production, Vol. 5, Sofia, 2023, pp. 86÷90.
I. Mitev, “Determining the diffusion coefficient in simultaneous saturation with boron and carbon austenite alloyed with cooper in powder metallurgy structural materials”, presented at AIP, vol. 2980, 2024, p.060016-1÷060016-7.
I, Mitev, “Optimizing the quantity of liquid phase at the sintering of powder construction materials from system Fe-Cu-Sn” presented at AIP, vol. 2980, 2024, p.060017-1÷060017-7.
I. Miteva, I.Vinev, I.Mitev, “Features of Alloying Matrix of Water-dispersed Iron Powders”, presented at the 13th International Scientific and Practical Conference on Environment, Technology, Resources, ETR 2021, Rezekne, Latvia, Volume 3, 2021, рр.226÷231.
D. Petrova, “Innovative Obsolescence in Mechanical Engineering and Singleness of Indicators”, presented at the 15th International Scientific and Practical Conference on Environment, Technology, Resources, ETR 2024, Rezekne, June 2024, Vol. 3, pp 221 – 224.
D. Petrova, B. Vlahova, A. Lengerov,Tz. Zlateva-Petkova, “Improvement of Constructive-Technological Approaches Reducing Innovative Obsolescence of Industrial Technologies in the Context of Industry 4.0”, presented at the 14th International Scientific and Practical Conference on Environment, Technology, Resources, ETR 2023, Rezekne, Latvia, June, 2023, Volume I, pp. 180–186.
D. Petrova, N. Nikolova, A. Lengerov, “Modeling business process reengineering in the digital era of industry 4.0”, presented at the 11th International Scientific Conference “TechSys 2022” – Engineering, Technologies and Systems, 2022, pp. 070013-1 - 070013-7.
T. Kuzmanov, K. Krumov, Technical preparation of production, EKS-PRESS, Gabrovo, 2013.Ugrinov P. CNC metal cutting machines. S., "Avangard Prima" Publishing House, 2019.
G. Viktors, E. Gerins, J. Rudzitis, A. Kromanis. “The Effect of the Cutting Parameters on the Machined Surface Roughness”, Solid State Phenomena, Vol. 260, 2017, pp. 219-226.
G. Karlovski et al., “Selection of Instrumentation Based on Statistical Analysis”,presented at the 32nd International Scientific Symposium “Metrology and Metrology Assurance”, MMA 2022, Sozopol, 7-11 September 2022.
M. Nabil, O. Taha, T. Elbitar, I. El Mahallawi. “Thermomechanical processing of 42CrMoS4 steel.” Presented at International heat Treatment and Surface Engineering - IHSE 2010. Vol. 4 (2), pp. 87-92.
M. Saez-de-Buruaga, L. Gainza, P. Aristimuno, D. Soler, G. Ortiz-de-Zarate, O. Aizpuru, R. Mielgo, P.J. Arrazola. “FEM modeling of hard turning 42CrMoS4 steel.” Presented at the 17th CIRP Conference on Modelling of Machining Operations. 82 (2019), pp. 77–82.
I. Mitev, S. Tsenkulovski, “Local Processing of Non-Metal Materials with Concentrated Energy Flow”, presented at the 14th International Scientific and Practical Conference on Environment, Technology, Resources, ETR 2023, Rezekne, Latvia, June, 2023, Volume 3, pp.183÷186.
S. Tsenkulovski, I. Mitev “Influence of the Parameters of the Lasser marking process of the depth of penetration in layer-reinforced composites”, presented at the 15th ISPC “Environment Technology Resources”, V.Turnovo, Bulgaria, 27 and 28 06.2024, Vol. 3, pp 319-324.
I. Alexandrova, Fundamentals of engineering research. Vasil Aprilov University Publishing House, Gabrovo, 2003.
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Georgi Karlovski, Petko Naydenov
This work is licensed under a Creative Commons Attribution 4.0 International License.